|
|
5 Port Gigabit 10/100/1000 Mbps Ethernet Network LAN Switch Hub Splitter UK $181.94 |
|
|
5 Port 10/100Mb RJ45 Ethernet Lan Cable Switch Splitter $10.43 |
|
|
8 Port 10/100Mb RJ45 Ethernet Lan Cable Switch Splitter $12.57 |
|
|
16 Port 10/100M RJ45 Ethernet Lan Cable Switch Splitter $27.03 |
|
|
3COM NBX 100 3C10220 Ethernet Power Source Switch + 3C10223 Splitter 12 pack $49.99 |
|
|
5Port HI Speed Ethernet Network LAN Splitter HUB Switch $10.83 |
|
|
8Port HI Speed Ethernet Network LAN Splitter HUB Switch $12.72 |
|
|
16 Port HI Speed Ethernet LAN Network Splitter Switch $28.48 |
|
|
Dynex 4-Port 10 Mbps LAN Ethernet Hub Switch Splitter $10.95 |
|
|
Dynex 5Port 10/100 Mbps LAN Ethernet Switch Splitter $11.95 |
|
|
24 Port Fast Speed Network Ethernet LAN Patch UTP RJ45 Splitter Hub Switch Giga $41.10 |
|
|
3 RCA to 1 Port Audio Video Switch Splitter+25FT HDMI 1.4 Ethernet Cable M/M $20.99 |
|
|
5Port 1 Uplink 10/100Mbps Ethernet Network LAN Splitter HUB Switch Power Adapter $10.83 |
|
|
5 Port Gigabit 10/100/1000 Mbps Ethernet Network RJ45 LAN Switch Hub Splitter PC $181.94 |
|
|
8 Port RJ45 10/100Mbps Ethernet Network LAN Splitter HUB Switch Power Adapter UK $12.68 |
|
|
15FT HDMI W/Ethernet+1Port 3RCA Video Audio AV HDTV DVD Switch Splitter Box $18.99 |
|
|
Startech 10/100 Poe Power Over Ethernet Splitter 5V/12V $59.99 Startech 10/100 Poe Power Over Ethernet Splitter 5V/12V The POESPLT100 10/100 Mbps PoE Power over Ethernet Splitter with 5-12V Output separates the data and power connections received from your Power Sourcing Equipment(PSE) such as a single port PoE injector or a PoE Switch. |
|
|
POES5 5 Volt Power Over Ethernet Splitter $26.95 The Linksys 5 Volt Power Over Ethernet Splitter lets you put your Linksys IP Phones almost anywhere, by removing the requirement of nearby power outlets. The POES5 sends power and VoIP over one Category 5 cable to your Linksys IP Phone. When it’s time to add or relocate a phone, the POES5 can simplify your installation. The POES5 provides an 802.3af PoE port for connection back to a PoE switch. The compact POES5 connects to the standard DC power input and RJ45 Ethernet port on the Linksys IP Phone (or other supported Linksys VoIP product) via two “split” cables. The POES5 can be then tucked away and concealed in the stand attached to the Linksys IP phone. Simplify your installation and place your Linksys IP Phones, or any of the other supported Linksys VoIP products in a preferred spot with the Linksys 5 Volt Power Over Ethernet (POES5) Splitter. |
|
|
PoE+ Splitter $47.94 Deliver Power over Ethernet to remote devices.The INTELLINET NETWORK SOLUTIONS PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.Simplify Installation for an Ethernet-based DeviceHaving to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.802.3af Compliant Power over EthernetThe PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.Adjustable Power OutputDuring the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.* Contact your INTELLINET NETWORK SOLUTIONS reseller for ordering information.** Maximum distance per 802.3u specifications. |
|
|
Cisco POES5 Power over Ethernet Splitter $30.99 1 1 x DC Power Jack 1 x RJ-45 10/100Base-TX 10/100Base-TX 100 mA to 2 A 2.68 oz 3.15″ x 0.87″ x 2.20″ 36 V DC 36 V DC to 36 V DC 5 V DC 57 V DC IEEE 802.3af Complaint FCC CE Linksys IP & VoIP Phones: SPA901 SPA921 SPA941 SPA3000 SPA9000 PAP2T SPA1001 SPA2000 SPA2002 SPA2100 SPA2102 SPA3102 The Linksys POES5 Power Over Ethernet Splitter lets you put your Linksys IP Phones almost anywhere, by removing the requirement of nearby power outlets. The POES5 sends power and VoIP over one Category 5 cable to your Linksys IP Phone. When it’s time to add or relocate a phone, the POES5 can simplify your installation. The POES5 provides an 802.3af PoE port for connection back to a PoE switch. The compact POES5 connects to the standard DC power input and RJ45 Ethernet port on the Linksys IP Phone (or other supported Linksys VoIP product) via two split cables. The POES5 can be then tucked away and concealed in the stand attached to the Linksys IP phone. Simplify your installation and place your Linksys IP Phones, or any of the other supported Linksys VoIP products in a preferred spot with the Linksys 5 Volt Power Over Ethernet (POES5) Splitter. Cisco Cisco Systems, Inc POES5 POES5 Power over Ethernet Splitter PoE Splitter www.cisco.com |
|
|
Poes5 – Cisco Poes5 Power Over Ethernet Splitter $34.94 the Linksys Poes5 Power Over Ethernet Splitter Lets You Put Your Linksys IP Phones Almost Anywhere, by Removing The Requirement of Nearby Power Outlets. The Poes5 Sends Power And Voip Over One Category 5 Cable to Your Linksys IP Phone. When It’s Time to Add or Relocate a Phone, The Poes5 Can Simplify Your Installation. The Poes5 Provides an 802.3af Poe Port For Connection Back to a Poe Switch. The Compact Poes5 Connects to The Standard DC Power Input And Rj45 Ethernet Port on The Linksys IP Phone (or Other Supported Linksys Voip Product) Via Two Split Cables. The Poes5 Can be Then Tucked Away And Concealed in The Stand Attached to The Linksys IP Phone. Simplify Your Installation And Place Your Linksys IP Phones, or Any of The Other Supported Linksys Voip Products in a Preferred Spot With The Linksys 5 Volt Power Over Ethernet (poes5) Splitter. [POES5] UPC: 745883568253 UNSPC: 39121000 6.5L x 5.75W x 1.5H 0.01 LB 0.03 Cubes |
|
|
LevelOne POS-1002 Power over Ethernet Splitter $23.03 LevelOne POS-1002 Power over Ethernet Splitter |
|
|
TRENDnet TPE-104S Power over Ethernet Splitter $21.65 TRENDnet TPE-104S Power over Ethernet Splitter |
|
|
Tp-Link TL-POE10R Power over Ethernet Splitter $18.91 Tp-Link TL-POE10R Power over Ethernet Splitter |
|
|
TRENDNET TPE-104S Power over Ethernet Splitter TPE104S $24.55 TRENDNET TPE-104S Power over Ethernet Splitter TPE104S |
|
|
Wasp Power over Ethernet Splitter $155.99 633808551179 Wasp Barcode Technologies Bio Clock PoE Splitter Power over Ethernet Splitter Wasp Wasp Barcode Technologies www.waspbarcode.com |
|
|
Ethernet Switch $102.99 TRENDnet’s TEG-S224 is a 26-port 10/100/1000Mbps Gigabit Ethernet Switch with 24 10/100Mbps Fast Ethernet ports and 2 10/100/1000Mbps Copper Gigabit Ethernet ports. |
|
|
Poesplt100 – Startech.Com 10/100 Poe Power Over Ethernet Splitter 5V/12V – Silver $60.88 the Poesplt100 10/100 Mbps Poe Power Over Ethernet Splitter With 5-12v Output Separates The Data And Power Connections Received From Your Power Sourcing Equipment(pse) Such as a Single Port Poe Injector or a Poe Switch. at The Remote End of Your Poe Connection, The Poesplt100 Gives You a Standard DC Jack With Selectable 5, 7.5, 9 or 12v Output And Separate Ethernet Data Connection Allowing You to Take Advantage of Power of Ethernet Infrastructure, And Use a Variety of Peripherals in Places Where no Wall Outlet Exists. backed by a Startech.com 1-year Warranty And Free Lifetime Technical Support. [2960414] UPC: 065030841818 UNSPC: 39121000 6.3L x 2.7W x 5H 0.6 LB 1 Cubes |
|
|
D-Link DWL-P50 Power over Ethernet (PoE) Splitter $34.99 1 1 Year 1.10″ Height x 2.05″ Width x 3.19″ Depth 10 to 80% Relative Humidity Operating 14°F (-10°C) to 158°F (70°C) Storage 2.88 oz 32°F (0°C) to 104°F (40°C) Operating 400 mA 48 V DC 5 V DC 5 to 90% Relative Humidity Storage IEEE 802.3af FCC Class B CE C-Tick UL Plug & Play Installation Deliver Power up to 328* Feet (100m) Away Output Current: 2.5 A at 5 VDC 1 A at 12 VDC CAT5, 5e, 6 Ethernet Pin Usage: When used with end-span PSE: Data: 1,2,3,6 Power: 1,2,3,6 When used with mid-span PSE: Data: 1,2,3,6 Power: 4,5,7,8 Note: DWL-P50 adapter must be used in conjunction with a PoE power device (ie. the DES-1316 switch or any PoE compliant switch) Access Point Models: DWL-1000AP+ DWL-2100AP DWL-7000AP DWL-7100AP DWL-800AP+ DWL-G700AP DWL-G800AP Internet Camera Models: DCS-2000 DCS-2100+ DCS-3220 DCS-3220G DCS-5300 DCS-5300G DCS-5300W DCS-900 D-Link, an industry leader in networking, introduces the DWL-P50 Power over Ethernet (PoE) Splitter. By using the DWL-P50, both data and electrical power can be delivered to a non-PoE Ethernet-enabled device from a single CAT5 Ethernet cable. D-Link D-Link Systems, Inc DWL-P50 DWL-P50 Power over Ethernet (PoE) Splitter PoE Splitter www.dlink.com |
|
|
TRENDnet Gigabit Power over Ethernet (PoE) Splitter $29.99 Specifications: Standard: IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab Gigabit Ethernet IEEE 802.3af Power over Ethernet Network Media: 10Mbps: UTP/STP Cat. 3, 4, 5; Up to 100 Meters 100Mbps: UTP/STP Cat. 5; Up to 100 Meters 1000Mbps: UTP/STP Cat. 5; Up to 100 Meters Protocol: CSMA/CD Topology: Star Ports: 1 x PoE-IN Port (Data + Power): data pin: 1,2,3,6 power in: 4,5(V+), 7,8(V-) and 1,2(V+), 3,6(V-) 1 x Data-OUT Port (Data) Pin 1,2,3,6 Switch: Adjustable output power DIP switch (5V, 7.5V, 9V, 12V) Power: Power In: 48VDC 0.3A Power Out: 5V(2A), 7.5V(1.33A), 9V(1.11A), 12V(0.86A) Power Consumption: 10 Watts Jumper Cable: Plug Dimension: 5.5 x 2.0mm and 5.5 x 2.5mm Diagnostic LEDs: Power: Green Temperature: Operation: 0°C~45°C (32°F~ 113°F) Storage: -40°C~70°C (-40°F~158 °F) Humidity: … |
|
|
TRENDnet TPE-112GS Gigabit Power over Ethernet (PoE) Splitter $29.99 0.94″ Height x 2.13″ Width x 3.15″ Depth 1 1 x RJ-45 10/100/1000Base-T 1.11 A 1.33 A 10/100/1000Base-T 12 V DC 15.50 W 2 A 2.82 oz 300 mA @ 48 V DC 48 V DC 5 V DC 5 Year 7.5 V DC 860 mA 9 V DC Adjustable Output Power: DIP switch (5V, 7.5V, 9V, 12V) Power Out: 5V(2A), 7.5V(1.33A), 9V(1.11A), 12V(0.86A) Power Consumption: 10 Watts IEEE 802.3af Complaint FCC CE UL TPE-112GS Gigabit Power over Ethernet (PoE) Splitter Multi-Language User’s Guide 2 x Power Jack (5.5 x 2.0mm, 5.5 x 2.0 mm) VoIP Phones Wireless Access Points The Gigabit Power over Ethernet Splitter (TPE-112GS) splits a networked PoE signal into separate power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables over long distances and then split the PoE signal into separate data and power sources in order to network non-PoE devices. Save installation and equipment cost when installing access points, IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non PoE network at Gigabit speeds. PoE Splitter TPE-112GS TPE-112GS Gigabit Power over Ethernet (PoE) Splitter TRENDnet www.trendnet.com |
|
|
Power Over Ethernet Splitter (DC5V, DC7.5V, DC9V, DC12V Adjustable PoE Splitter) $25.99 FeaturesIEEE 802.3af compliance Converts non-PoE devices with Power over Ethernet support Adjustable output DIP switch for 5V, 9V, and 12V adjustable output Delivering power and data to equipment via a single Ethernet cable Eliminates the need for a bulky power adapter and power line for your appliance Compatible with Wireless Router, AP, Network Camera, Print server, Converter Light weight and compact size Provides interchangeable tipsSpecificationPoE Splitter Models Specifications Requlatory: 802.3afData Rate: 10/100MInput Power Voltage: DC48V/0.3AOutput Power Voltage: 5V(2A), 9V(1.1A), 12V(1A) Input Power Requirement: 1/2( ) 3/6(-) or 4/5( ) 7/8(-) Jumper Cable: DC 2.1 5.5 9.5mm (L-300mm) Connectors: Shielded RJ-45, EIA 568A and 568B Diagnostic LEDs: DC Power is Green Temperature Operating: -10 ~ 45 ℃ Humidity: 10 ~ 90% (Non-Condensing) Certification: CE, FCC |
|
|
Axis Power Over Ethernet Splitter $86.99 1 1 x DC Power Jack 1 x RJ-45 10/100Base-TX 5 V DC 5008-001 6.72 oz AXIS Network Cameras: 206 206M 207 IEEE 802.3af Compliant Axis Axis Communications PoE Splitter Power Over Ethernet Splitter www.axis.com |
|
|
Cables To Go Ethernet 48V Power Injector/Splitter – Power Injector + Poe Splitter $86.99 Cables To Go Ethernet 48V Power Injector/Splitter – Power Injector + Poe Splitter C2G Ethernet 48V Power Injector/Splitter – Power injector + PoE splitter – AC 100-240 V |
|
|
Drop Split Adapter Ethernet 10Base-T splitter $39.99 Black Box Drop Split Adapter – Ethernet 10Base-T splitter – 50 pin Telco (M) – RJ-45 (F) |
|
|
Nortel Contivity VPN Switch 400 Switch Ethernet Fast Ethernet DM1401E79 $261.35 Nortel Contivity VPN Switch 400 Switch Ethernet Fast Ethernet DM1401E79 |
|
|
splitter Power over Ethernet (DC5V, dc7.5v, DC9V, DC12V regolabile poe splitter) $21.01 Caratteristiche la conformità allo standard IEEE 802.3af converte non-PoE con potenza al supporto per PoE uscita regolabile dip switch per la 5V, 9V e 12V di uscita regolabile l’erogazione di corrente e dati alle attrezzature tramite un unico cavo ethernet elimina la necessità di una linea ingombrante adattatore di alimentazione e di alimentazione per l’apparecchio compatibile con i router wireless, ap, telecamera di rete, server di stampa, convertitore leggerezza e dimensioni compatte fornisce suggerimenti intercambiabili specificazione poe modelli splitter specifiche requlatory: 802.3af dati: 10/100M Ingresso tensione di alimentazione: dc48v/0.3a uscita tensione di alimentazione: 5v (2a), 9v (1.1a), 12v (1a) assorbimento di potenza di ingresso: 1/2 ( ) 3/6 (-) o 4/5 ( ) 7/8 (-) ponticello cavo: dc 2,1 5,5 9,5 millimetri (l-300mm) connettori: RJ-45, EIA 568A e 568B LED di diagnostica: dc di alimentazione è verde temperatura di funzionamento: -10 ~ 45 ℃ Umidità: 10 ~ 90% (senza condensa) Certificazione: CE, FCC |
|
|
HP E4510-48G Ethernet Switch $2144.99 2 E4510-48G E4510-48G Ethernet Switch Ethernet Switch HP Hewlett-Packard JF428A#ABA Lifetime RoHS Yes www.hp.com |
|
|
ST3105 5 PORT ETHERNET SWITCH $7.99 ST3105 5 PORT ETHERNET SWITCH |
|
|
CNet CSH-1600 Fast Ethernet Switch $54.1 CNet CSH-1600 Fast Ethernet Switch |
|
|
CNet CSH-2400 Fast Ethernet Switch $76.75 CNet CSH-2400 Fast Ethernet Switch |
|
|
Cisco Switch Ethernet 12-Ports CS150LAN04 $1140.35 Cisco Switch Ethernet 12-Ports CS150LAN04 |
|
|
IBM Ethernet Switch B24x 0563012 $6630 IBM Ethernet Switch B24x 0563012 |
|
|
Cisco 1548M Ethernet Switch CISCO1548M $60 Cisco 1548M Ethernet Switch CISCO1548M |
|
|
Belkin Ethernet Switch – 10/100Base-TX E4G0500 $38.77 Belkin Ethernet Switch – 10/100Base-TX E4G0500 |
|
|
Cabletron 4-Ports Ethernet Switch 3E05-04 $536.44 Cabletron 4-Ports Ethernet Switch 3E05-04 |
|
|
Zyxel GS2200-48 Ethernet Switch GS220048 $1073.25 Zyxel GS2200-48 Ethernet Switch GS220048 |
|
|
Belkin Ethernet Switch – 10/100Base-TX E4G0800 $46.97 Belkin Ethernet Switch – 10/100Base-TX E4G0800 |
|
|
Belkin Ethernet Switch – 10/100/1000Base-T E4G0510 $54.14 Belkin Ethernet Switch – 10/100/1000Base-T E4G0510 |
|
|
Belkin Ethernet Switch – 10/100/1000Base-T E4G0810 $64.38 Belkin Ethernet Switch – 10/100/1000Base-T E4G0810 |
|
|
Foundry 16-Ports Ethernet Switch FCSLB16F2GE $1502.5 Foundry 16-Ports Ethernet Switch FCSLB16F2GE |
|
|
Black Box Abc Ethernet Switch $72.99 Black Box Abc Ethernet Switch |
|
|
5-Port 10/100 Mbps Ethernet Switch $39.99 5-PORT 10/100 MBPS ETHERNET SWITCH |
|
|
2-Channel Component Video Splitter/Switch – video splitter/switch – 2 ports – desktop $303.99 Black Box 2-Channel Component Video Splitter/Switch – Video splitter/switch – 2 x component video – desktop |
Passive Optical Networks: The Future of Networking
Passive optical networks (PONs) set the new standard for high-speed network architecture that brings fiber cabling and signals to a user based upon a point-to-multipoint design that enables a single optical fiber to serve multiple devices. The architecture uses passive (unpowered) optical splitters, reducing the cost of equipment compared to copper-based architectures that require signals to be “refreshed” every 100 meters.
PONs architecture are designed to be very efficient, as they provide telephone, video, and data traffic over a single strand of optical fiber for up to 64 users. Compare this to a traditional copper-based architecture which require three separate copper cabling infrastructures (one for voice traffic, one for video traffic, and one for data/Internet traffic). In fact, a typical 7-story building with 1,000 employees will require about 18,000 lbs of copper cabling for all of the phone lines, data/ethernet connections, and CATV connections. That same building can be serviced using less than 3,000 lbs of fiber optic cabling. Not only is there a deadweight savings of 15,000 lbs, but there is a huge savings in copper which is a natural resource that is being depleted from of planet by huge copper mines.
A PON implementation uses lasers and wave division multiplexing to simultaneously transmit and receive all voice, video, and data signals across the network. By using fiber optic cabling coupled with unpowered optical splitters, a properly installed PON infrastructure can support end-users up to 24 miles away without the use of repeaters or amplifiers. Compare this to a copper-based network infrastructure that relies upon workgroup switches every 100 meters (That’s less than 330 feet!).
So, by using a PON infrastructure an organization can save on the cabling as well as eliminate the workgroup switches from every IDF/Telco room. This paradigm shift in networking infrastructure is far reaching in many different aspects. Here are some of the benefits:
1. Replace the three different copper cabling infrastructures (telephone, video, and data) with a single fiber optic cabling infrastructure.
2. Reduce the deadweight in a building by replacing the dense and heavy copper cabling with very light fiber optic cabling.
3. Eliminate the workgroup switches from every IDF/Telco room, which means saving the cost of purchasing that equipment.
4. Reduce/eliminate the dedicated HVAC used for cooling the IDF/Telco rooms. Since the workgroup switches are eliminated, it also reduces and/or eliminates the need for dedicated HVAC to keep those rooms cool.
5. Because a PON fiber optic network can provide higher bandwidth, it is able to offer higher efficiency using larger, variable-length packets. This permits efficient packaging of user traffic, with frame segmentation allowing higher quality of service (QoS) for delay-sensitive voice and video communications traffic.
The benefits presented in this article for a PON infrastructure touch upon technical superiority, plus savings in space, weight and power. All of these factors contribute towards lower capital costs as well as reduced operating expense for a network infrastructure.
About the Author
Dr. James Reynante is a specialist in systems architecture & design. His expertise includes the application and integration of various technologies including advanced fiber optical networking, alternative energy development, computer modeling, and RF communications. He holds a PhD in Computer Science and has served as an Assistant Vice President and Chief Engineer for Science Applications International Corporation (SAIC), a Fortune 500 scientific R&D company. Currently, Dr. Reynante is the Director of Engineering for Spada Innovations, a world-class network engineering company.
D-Link DWL-P50 Power over Ethernet Splitter